Thursday, February 23, 2023

Spring is so close!

As spring approaches, for you new beekeepers - check out the following article from BetterBee!  It is the best guide into becoming a new beekeeper:

BetterBee Website


Friday, August 5, 2022

Bottling Honey

What goes into bottling honey, you ask?

Honey Comb - is it ready?

Well, an ol' timer may say to not extract honey that isn't capped.  Why?  The bees will "cap" honey when the moisture content is right and then it is ready.  See the photo below?  That's what "capped" honey looks like.  It has a hard surface that holds the honey back - it's basically a layer of new wax the bees put over it to protect it when they know it is at the right moisture level.  If you take it before, it will be tough to remove the moisture from it.

There is a certain amount of water that is contained in honey.  However, too much and it could ferment if you don't eat it fast enough.  The acceptable level is somewhere between between 15.5% and 18.6% with high quality under 17%.

How do you measure the content?  Well, again, your experience beekeeper will only extract the capped honey above.  And that's what Christian did.  Me as the scientific mind wanted to know what it really was.

Extraction

Equipment Needed:  Knife, comb scratcher, food grade bucket (like a honey bucket) and an extractor (plus a food grade bin to cut the wax into)

Being cheap, I decided to get the VINGLI 2 Frames Manual Honey Extractor Separator, Food Grade Stainless Steel Honeycomb Spinner Drum Crank by Hand with Adjustable Height Stands, Beekeeping Pro Extraction Apiary Centrifuge Equipment from Amazon.  Christian had to modify it this year.  It isn't sturdy enough on its legs to not rock.  Dad and Christian removed the legs and put in its place 2x4 legs with a base of plywood on the bottom.  Standing on the plywood, it doesn't rock now.

Anyway - using the knife (get a honey uncapping knife), cut the wax capping off the frame.  Usually, you can place the knife against the frame and cut up/down.  Also, for ease, you can balance on the side of a food grade bin to cut them into.

Then you place two at a time in the extractor and spin.  When the bin fills up, you let it empty into a food grade honey bucket.  Once you are done (with all your buckets), put a lid on and leave it sit for 24 hours.  This allows it to settle.

As a side note, we do use a filter at the bottom of the extractor and on the top of the bucket.  This keeps chunkiness down.  Also, I then save the wax, the filtered mess and melt it down later.  You'll go through several more filtering when you melt down the wax.

Science

You thought I wasn't going to say anything about the percentage, didn't you?

Using a refractometer, you can determine the percentage of moisture in the honey.  What does it look like?  Take a peek, because I'm super proud:

Less than 17% - ya, that's good honey!

Bottling

After you waited a couple days to let the air settle out of the honey in the buckets, you can use the spout at the bottom and carefully fill bottles.  Oh pick any bottle you like.  I see in our area that an ounce is about $1 each or a little more.  Make yourself some labels and be sure to add the nutrition labels.

I tell everyone that I give a bottle to that they should not feed to infants under 1.  (Side note: I am only selling to friends; but if I were selling it on a bigger scale, I would totally put a label on the bottle for it.)  There's labels for that and informational ones like how to liquify honey.  Actually, there's a whole business in labels on Etsy and various beekeeper shops.


That's the process in a nutshell.  We had 58 bottles total (about 7 gallons of honey), plus a small jelly canning jar for that last little bit in the honey bucket.  And you guessed it - they are 16 ounce bottles for $16.  Get them while they are here!  Next?  What to do with all the cappings and extra wax!  (PS> I'm so proud of Christian.  What an accomplishment to finally have the honey to sell!  Last year, we had 20 bottles that we shared with friends and family.)

Monday, August 1, 2022

Liquid Gold

We harvested honey! Yes, it was late you may say.  However, life was in the way and we noted that the bees were still working on the clover in our yard.  It paid off!


Looking for some honey?  Contact us now to get a bottle!  A 16ox bottle is $20.

Saturday, March 26, 2022

Helping Friends

It was a cold snowy day on March 26th.  Even with the weather, we still drove down to Washington, PA to pickup a hive.  Our friend is moving to New Mexico.  Rather than trying to move the bees thousands of miles, it's easier to move them 60 miles.


Pickup

At around 7:30, we just barely got the box wrapped up before snow started falling.  We put a screen on the inner cover with duct tape to keep the bees inside, but able to breath.  Chris then lifted both deep boxes together onto a slightly larger piece of plywood.  Before carrying it, we secured the whole setup with a couple of ratchet straps.  Then Chris carried it up the hill to the car.

As we drove home, the snow let loose!



Home

Once we made it home, it was a quick process.  You can see we will need to transition them to a 10-frame hive, because they are currently in an 8-frame hive.  Now we will leave them for a transitioning period for at least two weeks.  The next nice day, they will send out scouts to reset their gps.

In other news, this takes our hive count to five.  Hopeful for a great honey season!



Monday, May 3, 2021

Swarm Season 2021 - Saxonburg Swarm Part 2

Sunday morning started with another call that there were more bees on the move.  Easy - just a small cluster to move.  Maybe the rest from Saturday.  Then, just when you think you know bees, more happens.

Sunday Swarm

Beekeeper's dream when it comes to a swarm.  Inches from the ground.  Easy enough.

 

After shaking these bees into the box, we stood back satisfied.  Soon, though, we realized they were vacating the tree they had been in.

 

Welcome to what it looks like when they swarm.  So apparently, part of the swarm had come out and rested on the tree.  They had been there for at least an hour.  Now comes quick thinking and outsmarting the swarm...

The bees in the box already had started working on the honey and frames we provided them.  They were working, rather than calling their sisters.

So let's out think them.  After watching the behavior, we noticed they wanted to swarm around the logs lining the yard.  So we moved the box there.  Using a stick sprayed with Swarm Lure, we were able to encourage some to go to the box.

Further encouragement was obviously needed, though, because they liked the idea of the logs.  So watching carefully that the queen wasn't settling there, we kept working the bees to stay in the air.  Slowly but surely, as some found the box, they began calling their sisters.

 




Finally, when most of the swarm knew where to go, we put the lid on the box.  Notice how they continue to encourage bees to join them (sticking their abdomen up in the air while making a particular sound with their wings).  You can even see them marching into the box!



So three generations of family rescued the bees.

 

PS> Liz braved the ride in the truck with the bees.  She was fully suited up, though!  As was Grandpa.


Saturday, May 1, 2021

Swarm Season 2021 - Saxonburg Swarm

It's that time of year!  And fortunately, it wasn't our bees that swarmed...

Swarm from Saxonburg, PA

A dear friend gave us a call that her tree hive swarmed.  20 minutes later, we started searching for the queen.  I never did spot her.  Based on a lot of bees moving on their own to the nuc box we brought, I would say she's probably in my first few scoops of bees to the box.

They really wanted to go into a hole lower in the tree than their original home.  So once I had a lot of bees in the box, I smoked out the hole.  They vacated the space and began swarming higher in the tree.  So we waited a few minutes to let them settle.

Since they were out of arm reach for even Christian, I told him stick the smoker up there and smoke them.  Then we stood back and waited to see what their behavior was.  ...they all went to the box on the ground.

I'd call that a win!  We'll know in a week or so if she's in there.

 

 

 

 


Wednesday, April 28, 2021

Delivery: Saskatraz bees

Our UPS driver made us his first stop today.  Apparently, he is allergic to bees.  His second stop was someone fairly close with another package of bees before starting his normal route.

Up to this point, we have always purchased a nuc.  Why?  There's more bees and the queen is already established.  A package of bees can be a little more difficult.

Did you see me talk about the Saskatraz bee project?  Well, that's what delivered today...

Installation

This wasn't what I expected.  I read the instructions multiple times before today.  I also stood in the apiary surrounded with everything I needed and reread it.  The actual instructions just don't truly line up with what I had.  So I struggled a bit with package #1 and then knew exactly what I needed to do for #2.

Mann Lake provides a really nice two page document on install.

What was it I missed?  First, look at what the box looks like.  There were no frames with it.  Maybe because it was different bees?  It was just a plastic box with nothing else inside (well, the bees were).

 

OK - so remove the feed.  Easy, twist the greenish thing under the plastic cover.  You need some muscle to slide the plastic cover off.

Then where was the queen box?  We shook it out into the frame body in the hopes of being able to see down inside.  Still didn't see it.

Turns out, it is under tape and not easily seen.  We took the tape off the top and found a little bit of metal that seemed out of place under that bright pink sticker in the photo.  If you unfold it, it was obvious you just slide it towards the hole opening and the queen cage comes out.

From there, it was easy.  We shook them all down in.  I modified what I thought should be done.  You can see what I did in the picture below.  The photo was my amazement that I had already set the queen down but they continued to hang out on my arm and hand (no stings!).  Anyway, we released the queen into the hive (that is up to you if you release her immediately); then, we put the inner cover on.  We were already prepared to give them buckets of 1:1 sugar water.  So the extra hive body was big enough to take the plastic box for the rest of the bees to take their time to come out.  Then we put the sugar water bucket beside it.


All in all, it went well - I think!  Took us around an hour to prepare and do the whole install.  The picture below on the left is right after we finished (we left the feed that came with the bees on top to allow those inside time to get out).  The picture on the right was taken about two hours later.  All seem settled in now.